Loading…
°CRYO · Cryotherapy devices (localized + WBC)
°CRYO Arctic
°CRYO's nitrogen-cooled flagship chamber. Nitrogen chills breathable air from outside the cabin, so the interior itself stays nitrogen-free while running roughly forty-five degrees Celsius colder at the floor than the electric e-Arctic — and it is ready to run again in about three minutes rather than half an hour.
2 years
Warranty
Wroclaw, Poland
Made in
Cryotherapy
Space planning
Reference the modality footprint before choosing a unit
This product page does not have an exact 3D model yet. The planning references below are generic envelopes tied to the listed modality, not this manufacturer's product.
Explore this generic equipment footprint, then place it in your studio plan.
Generic reference model
Cryo chamber
4.5′ × 5.5′ floor envelope
Generic planning geometry for early space planning. It is not a manufacturer-specific product, installation drawing, or purchasing specification; confirm the selected model's final envelope, service clearances, utilities, and ceiling requirements before ordering.
Place reference in planner
Key features
- Liquid nitrogen chills the air from outside the cabin, leaving the chamber interior itself nitrogen-free
- °CRYO states the -140°C figure is verified throughout the chamber head to toe rather than sampled at the top
- Three-minute cooldown and three-minute re-cool underpin the published ten-sessions-per-hour throughput
- Nitrogen sensor, emergency stop and a magnetic door latch that can be opened from inside
- 15.6-inch touchscreen for protocol selection, with an adjustable window and Bluetooth audio for the occupant
- Remote connection by °CRYO Science for technical assistance; built in Europe with major parts sourced within 100 km of the Wrocław factory
Specifications
- Chamber temperature
- -110°C to -140°C (measured in chamber at body level)
- Cooling medium
- Liquid nitrogen, used outside the chamber to chill breathable air within
- Session duration
- 3 minutes
- Cooldown time
- 3 minutes
- Re-cooling time
- 3 minutes
- Throughput
- 10 sessions per hour
- Nitrogen use
- ~12 liters per session
- Dimensions (H x W x D)
- 2300mm x 1800mm x 1000mm
- Weight
- 305 kg without crates
- Power
- 230V 50Hz or 110V 60Hz
- Display
- 15.6" touchscreen
- Manufacturing location
- Wrocław, Poland
Expanded fit
°CRYO Arctic runs 1305 mm wider and 419 mm deeper than the °CRYO Wave, from a 1800 mm × 1000 mm plan.
Product-row differences
Direct product-row facts compared with °CRYO Wave; shared values are omitted.
Warranty: this product lists 2 years; °CRYO Wave lists 2 years standard; 1 year for applicator.
Product row lists in the box: High-end clothing sets.
Product row lists certifications: CE and SFDA.
Product details
- Regulatory status & certifications
- CESFDARegistration or listing does not by itself mean a device is FDA approved or cleared. Confirm model-specific status and intended use with the manufacturer and the relevant regulator before purchase.
What's included
- High-end clothing sets