Loading…
°CRYO · Cryotherapy devices (localized + WBC)
°CRYO e-Arctic
The electric sibling of the Arctic, on the same chassis and the same touchscreen but with cascade refrigeration in place of liquid nitrogen — no tank, no refill schedule, no leak sensor. It trades that convenience for a warmer floor and an initial cooldown of half an hour against the nitrogen model's three minutes.
2 years
Warranty
Wroclaw, Poland
Made in
Cryotherapy
Space planning
Reference the modality footprint before choosing a unit
This product page does not have an exact 3D model yet. The planning references below are generic envelopes tied to the listed modality, not this manufacturer's product.
Explore this generic equipment footprint, then place it in your studio plan.
Generic reference model
Cryo chamber
4.5′ × 5.5′ floor envelope
Generic planning geometry for early space planning. It is not a manufacturer-specific product, installation drawing, or purchasing specification; confirm the selected model's final envelope, service clearances, utilities, and ceiling requirements before ordering.
Place reference in planner
Key features
- Cascade electric cooling with no liquid nitrogen, so there is no tank, no refill schedule and no nitrogen sensor to maintain
- Machinery can be sited in a separate room from the cabin to keep compressor noise out of the treatment space
- Standby mode holds the chamber near-ready without paying the full initial cooldown a second time
- Draws under 8 kWh per hour; the install constraint is the supply, at 30A/400V 50Hz or 60A/208V 60Hz
- No flammable hydrocarbons in the refrigerant circuit, and icing is managed hands-off with quick drying between sessions
- °CRYO advertises variable session intensities to suit different user profiles, though it does not publish the level names
Specifications
- Chamber temperature
- -95°C real chamber temperature; up to -110°C perceived with windchill
- Cooling method
- Cascade electric refrigeration; no liquid nitrogen
- Session duration
- 3 minutes typical
- Cooldown time
- Under 35 minutes initial; under 3 minutes re-cool
- Energy consumption
- Under 8 kWh per hour
- Dimensions (H x W x D)
- 2300mm x 1800mm x 1000mm
- Weight
- 410 kg chamber, 400 kg machinery
- Shipping
- 4 crates
- Display
- 15.6" touchscreen
- Electrical
- 30A @ 400V 50Hz or 60A @ 208V 60Hz
- Manufacturing location
- Wrocław, Poland
Matched fit
°CRYO e-Arctic shares its 1800 mm × 1000 mm floor plan with the °CRYO Arctic.
Product-row differences
Direct product-row facts compared with °CRYO Wave; shared values are omitted.
Warranty: this product lists 2 years; °CRYO Wave lists 2 years standard; 1 year for applicator.
Product row lists in the box: High-end clothing sets.
Product row lists certifications: CE.
Product details
- Regulatory status & certifications
- CERegistration or listing does not by itself mean a device is FDA approved or cleared. Confirm model-specific status and intended use with the manufacturer and the relevant regulator before purchase.
What's included
- High-end clothing sets