Loading…
OxyHelp · Hyperbaric oxygen chambers
OxyHelp OXYLIFE I/90
The wider OXYLIFE I capsule: 90 cm across against the I/80's 80, which is about a quarter more cabin volume for the same 220 cm length. OxyHelp's stated reason for offering the larger bore is to reduce dropout from claustrophobia. It carries 15 kg more to move, at 105 kg.
2 years, with 3-year extension option
Warranty
European Union
Made in
Hyperbaric oxygen
Space planning
Reference the modality footprint before choosing a unit
This product page does not have an exact 3D model yet. The planning references below are generic envelopes tied to the listed modality, not this manufacturer's product.
Explore this generic equipment footprint, then place it in your studio plan.
Generic reference model
Hyperbaric chamber
7.9′ × 3.2′ floor envelope
Generic planning geometry for early space planning. It is not a manufacturer-specific product, installation drawing, or purchasing specification; confirm the selected model's final envelope, service clearances, utilities, and ceiling requirements before ordering.
Place reference in planner
Key features
- Wider 90 cm bore, offered specifically to reduce the incidence of non-compliance because of claustrophobia
- Colour touchscreen sets four values manually: compression and decompression speed, pressure level, chamber temperature and session time
- Two independent overpressure layers, a manual relief valve and an automatic pressure controller, with the compressor shutting off after 60 seconds of malfunction
- Automatic depressurization on power failure, a user quick-stop button, and emergency depressurization operable by user or operator
- Pressure-sealed hingeless door running on anti-friction bearings, so no closing mechanism carries the pressure load
- Two-stage air filtration at 0.05 and 0.01 micrometres, with an antibacterial interior certified to Japanese SEK standards
- Daily history recording of session count, session length, and start and stop times
Specifications
- Chamber dimensions
- 90 cm diameter x 220 cm long
- Internal volume
- 1463 litres
- Weight
- 105 kg
- Maximum pressure as sold
- 1.5 ATA (0.5 bar), software-limited, non-medical marking
- Vessel build rating
- 2 ATA maximum working pressure, unlocked only under CE Class IIb certification
- Body material and colour
- Aluminium-titanium alloy, white
- Window
- 10 mm polycarbonate, made in Japan
- Usage time
- 30-600 minutes
- Oxygen density
- 32 per cent
- Operation outside
- Colour touchscreen
- Operation in capsule
- Start / stop only
- Air filtration
- Two stages, 0.05 and 0.01 micrometres
- Ear equalizer
- Automatic
- Interphone
- Included
- Installation base
- Caster wheels
- Air conditioning (cool and warm)
- Optional
- Oxygen concentrator
- Optional; AirSep, 10 L/min, 138 kPa output
- Standards
- PVHO, with X-ray, ultrasound and dye-penetrant inspection by authorised laboratories
- Warranty
- 2 years, with a 3-year extension option
Product details
- Regulatory status & certifications
- PVHOCE Class IIB (medical device version)Registration or listing does not by itself mean a device is FDA approved or cleared. Confirm model-specific status and intended use with the manufacturer and the relevant regulator before purchase.