Loading…
Perry Baromedical · Hyperbaric oxygen chambers
Sigma ICON 30
A clinical monoplace chamber built around a 30-inch clear acrylic tube an inch and a quarter thick, entered on a height-adjustable Stryker gurney that locks to the shell for the transfer. Perry rates it to 3.0 ATA and 500 lb, and holds it to 100.5 inches so it fits a standard elevator.
Hyperbaric oxygen
Space planning
Reference the modality footprint before choosing a unit
This product page does not have an exact 3D model yet. The planning references below are generic envelopes tied to the listed modality, not this manufacturer's product.
Explore this generic equipment footprint, then place it in your studio plan.
Generic reference model
Hyperbaric chamber
7.9′ × 3.2′ floor envelope
Generic planning geometry for early space planning. It is not a manufacturer-specific product, installation drawing, or purchasing specification; confirm the selected model's final envelope, service clearances, utilities, and ceiling requirements before ordering.
Place reference in planner
Key features
- Medical monitoring ports for EKG, BP, IV and TCOM during treatment
- Superior electronic two-way voice communication, with a handset on the control module for discreet conversation
- Backup power source keeping communications running through a power outage
- Pneumatic control panel that keeps the system safely operable even in a power failure
- Adjustable-height Stryker gurney that locks to the chamber during patient transfer
- 30-inch internal diameter with a 1.25-inch clear acrylic tube for a compact footprint
- Left- or right-hand control and door configurations, so two systems can be run by one centrally seated attendant
- 100.5-inch overall length sized to fit a standard elevator, with wheel assist for moves
- Optional TV, radio or recorded audio entertainment system
Specifications
- Maximum operating pressure
- 30 psig (66 FSW) / 2.07 bar / 3.0 ATA
- Internal diameter
- 30.0 inches (0.762 m)
- Internal length
- 85.5 inches (2.172 m)
- Internal volume
- 34.9 cubic feet (0.99 m3)
- Overall length
- 100.5 inches (2.553 m)
- Overall width
- 40 inches (1.016 m)
- Height
- 60.5 inches (1.537 m)
- System weight
- 2,100 lb (952 kg)
- Maximum patient weight (gurney)
- 500 lb (227 kg)
- Acrylic tube thickness
- 1.25 inches
- Design temperature
- 32 F to 100 F (0 C to 38 C)
- Oxygen supply pressure
- 50 to 90 psig (3.45 to 6.2 bar)
- Oxygen supply peak flow
- 30 scfm
- BIBS supply pressure (air or O2)
- 50 to 90 psig (3.45 to 6.2 bar)
- BIBS supply flow (air or O2)
- 3.5 scfm (100 lpm)
- Ventilation rate
- 4.4 to 13.6 scfm (125 to 385 lpm)
- Pressure change rate
- Approximately 1 to 5 psi/min (0.07 to 0.34 bar/min)
- Emergency depressurization
- 3 ATA to 1 ATA in 120 seconds
- Gurney dimensions
- 30.25 x 85.37 x 33.79 in (768.4 x 2186.4 x 858.3 mm)
- Mattress dimensions
- 21 x 75 x 3.125 in (533.4 x 1905 x 79.4 mm)
- Gauges
- System pressure 0-100 +/-3% psi; set pressure 0-30 +/-0.5% psi; chamber pressure 0-30 +/-0.5% psi; ventilation 125-385 +/-2% lpm
- Regional availability
- Per the manufacturer's own page banner, the ICON 30 model is not available in North America or the EU
Compact fit
Perry Baromedical Sigma ICON 30 is the tighter fit of the pair: its 40 inches (1.016 m) × 100.5 inches (2.553 m) floor plan comes in 4.5 in narrower and 5.5 in shallower than the Sechrist 3300H.
Product details
- Regulatory status & certifications
- FDA approved (manufacturer statement on the product page banner; no clearance number is published, and the same banner states the ICON 30 model is not available in North America or the EU)Registration or listing does not by itself mean a device is FDA approved or cleared. Confirm model-specific status and intended use with the manufacturer and the relevant regulator before purchase.