Loading…
Rejuve Lab · Monoplace Hyperbaric Chamber
Rejuve Lab HBO-SV200
Rejuve Lab's steel-shelled single-person chamber, pitched at hospitals and high-frequency commercial use rather than the home. It is half a metre longer and a hand's width wider inside than the composite M200 for the same shell weight, and unlike that model it can be driven from inside the chamber as well as from the attendant's position outside.
China
Made in
Hyperbaric oxygen
Space planning
Reference the modality footprint before choosing a unit
This product page does not have an exact 3D model yet. The planning references below are generic envelopes tied to the listed modality, not this manufacturer's product.
Explore this generic equipment footprint, then place it in your studio plan.
Generic reference model
Hyperbaric chamber
7.9′ × 3.2′ floor envelope
Generic planning geometry for early space planning. It is not a manufacturer-specific product, installation drawing, or purchasing specification; confirm the selected model's final envelope, service clearances, utilities, and ceiling requirements before ordering.
Place reference in planner
Key features
- Alloy structural steel shell in place of the M200's composite, which is what Rejuve Lab sells it on for hospitals and high-frequency commercial sites
- Half a metre longer and 23 cm wider inside than the M200, on the same 600 kg shell weight
- Controllable from inside the chamber as well as from the attendant position outside
- Shares the M200's integrated host module - compressor, concentrator and cooler in one 139 kg cabinet
- The built-in concentrator holds 90 +/- 3% oxygen as a fixed output, so there is no flow or concentration dial to set
- Working pressure is specified at build time rather than chosen at the panel
Specifications
- Capacity
- 1 person
- Working pressure
- Customizable; manufacturer states up to 2.0 ATA
- Material
- Alloy structural steel
- Chamber size
- L1900 x W1030 x H1870 mm
- Chamber weight
- 600 kg
- Host size
- L526 x W859 x H1080 mm
- Host weight
- 139 kg
- Oxygen concentration
- 90 +/- 3%
- Voltage
- 220 V 50 Hz (customizable)
- Power
- 2,800 W
- Control panel
- Touch, digital display; operable from inside and outside the chamber
- Certification
- CE
Product details
- Regulatory status & certifications
- CERegistration or listing does not by itself mean a device is FDA approved or cleared. Confirm model-specific status and intended use with the manufacturer and the relevant regulator before purchase.