Loading…
Vacuactivus · Cryotherapy chambers
Vacuactivus Antarctica WBC Nitrogen
A walk-in chamber in which nitrogen cools a heat exchanger instead of entering the cabin, so the client steps inside head and all and breathes chilled but ordinary air. Enclosing the head costs cold: it stops at -140C, thirty degrees warmer than the open-head Vacuactivus models, and burns 4-7 kg of nitrogen a session rather than 3-5.
USA & Europe (Ukraine, Poland)
Made in
Cryotherapy
Space planning
Reference the modality footprint before choosing a unit
This product page does not have an exact 3D model yet. The planning references below are generic envelopes tied to the listed modality, not this manufacturer's product.
Explore this generic equipment footprint, then place it in your studio plan.
Generic reference model
Cryo chamber
4.5′ × 5.5′ floor envelope
Generic planning geometry for early space planning. It is not a manufacturer-specific product, installation drawing, or purchasing specification; confirm the selected model's final envelope, service clearances, utilities, and ceiling requirements before ordering.
Place reference in planner
Key features
- Walk-in design — the whole body including head and neck sits inside the cold zone
- Nitrogen cools a heat exchanger rather than entering the cabin, so the circulated air stays fully breathable throughout the session
- Glass door and glass roof to reduce the sense of enclosure in a fully closed chamber
- Powerful fans circulate cold air evenly around the cabin
- 10.1 inch touchscreen with three automatic programs and one manual program
- Adjustable temperature sensors that target the cold airflow through the chamber
- Built-in speakers and projection lighting for the cabin
- Fast pre-cooling — the heat exchanger is chilled directly by nitrogen rather than waiting on a compressor
Specifications
- Temperature range
- -120C to -140C (-184F to -220F)
- Dimensions
- 1870 x 1170 x 2292 mm (73 x 46 x 90 in)
- Weight
- 450 kg (990 lbs)
- Shipping weight
- 600 kg (1322 lbs) with packing crate
- Nitrogen consumption
- 4-7 kg per session including pre-cooling
- Power supply
- 220V/50Hz or 110V/60Hz
- Energy consumption
- 1.5 kW, up to 20A
- Cooling method
- Heat exchanger cooled by nitrogen; 100% breathable cold air, no nitrogen vapour inside the cabin
- Control panel
- 10.1 inch touchscreen, 3 automatic programs + 1 manual program
- Enclosure
- Walk-in cabin with glass door and glass roof